Mitsubishi Challenger 2009 - 2013 PB

Headunit Installation Requirements

You will need

Facia - Single DIN : 

Required

Facia - Double DIN: 

Required

Steering Wheel Control Harness: 

Required, also requires radio brand specific patch lead

Primary Harness: 

Required, may require a secondary harness

Additional Products

T Harness (for adding aftermarket bluetooth car kits): 

Available
Images
About this Vehicle

Dates: 

Dec 2009 through Nov 2013

Manufacturer: 

  • Mitsubishi

Sub-Model: 

PB

Chassis Type: 

  • 4x4

Place of Origin: 

Japan

Tags: 

  • Challenger
  • PB
  • Mitsubishi
  • 4x4

Mitsubishi Challenger PB

The second generation of the vehicle, based on the ladder frame chassis of the Mitsubishi Triton/Mitsubishi Freeca/L200/Hunter. It is offered as 2.5 or 3.2 litre diesel and 3.0 or 3.5 litre V6 petrol engines are available as before, while five- or seven-seat interior configurations are offered.

Information provided by: http://en.wikipedia.org/wiki/Mitsubishi_Challenger#Second_generation_.282008.E2.80.93present.29

Factory Headunit Notes

The PB Challenger featured a Mitsubishi single DIN Radio with a red vehicle display.

Pre 2012 model radios (W697) use the CHMB8C Steering wheel control adapter

Post 2012 model radios (W776) use the CHMB5C

CHMB6C for factory Kenwood navigation systems

The display can be replaced with a single or double DIN radio and relocated to the factory radio position using the FP8013CR relocation kit