Nissan Qashqai 2014-2021 J11

Headunit Installation Requirements

You will need

Facia - Single DIN : 

Required

Facia - Double DIN: 

Required

Steering Wheel Control Harness: 

Required, also requires radio brand specific patch lead

Primary Harness: 

Required, may require a secondary harness

Antenna Adaptor: 

Required

Manufacturers headunits can vary slightly for this vehicle, please select yours for best results:

1. Non Navigation

2. Navigation 360 Camera

3. Non Navigation 2020 Facelift

4. Navigation 360 Camera 2020 Facelift

Images
About this Vehicle

Dates: 

Jan 2014 through Jan 2021

Manufacturer: 

  • Nissan

Sub-Model: 

J11

Chassis Type: 

  • 4x4

Place of Origin: 

Japan

Tags: 

  • Qashqai
  • Nissan
  • 4x4
  • J11

Nissan Qashqai

The first generation model with the Dualis nameplate was sold alongside the newer model, which has borne the Qashqai name in Australia since July 2014.

Information provided by: https://en.wikipedia.org/wiki/Nissan_Qashqai#Second_generation_(J11;_2013)

Wiring Information

To change the time in the Series 2 when using the CHNI9C
Scroll through the menu to aux source, this will appear on the cluster. Press and hold ok, set the time, press OK to save
APP7220 required for Series 2 with Bose amplifiers. Amp located under passenger seat. 12v trigger at main radio harness. Speakers are 4ohm

Reverse tones are generated by the vehicle and not the Head unit. A chimes retention harness is not require when replacing the factory unit.

Speaker Cavities
Front: 6x9"
Front Tweeter 1"
Rear: 6-1/2"